The problem is that stitch and glue light charges for those plans. in addition, it doesn't seem to allow you to choose how many pieces you would like in the output. since i plan to bend the ply quite a bit i hope to avoid having too many chines in the final construction.. What plans are there for a stitch and glue semi-displacement hull around 20-25' long powered by a 4 cyl diesel motor that will do about 15-20miles an hour. All interior joints (hull seams-bulkheads and longitudinals) should be glassed with a schedule of 4", 6" and 8" 12 oz biax with a layer or two of 6 oz cloth over that. 34' is no problem with stitch and glue.
The foundation. location of stations: the station numbering of the stitch and glue kayaks as well as the hybrids indicates the distance in feet from station 0 (zero).so for example, the hull cradles on the cirrus are at 2.5, 8.5 and 14 feet from station zero.. Hull type: garvey vee bottom developed for stitch and glue sheet plywood or welded aluminum construction. power: single long shaft outboard motor to 85 hp maximum; 50 hp is more than adequate for most uses.. Stitch & glue the hmd19 is another evolution of the popular hm19. it uses a true displacement hull that is suited for lower speed and has low power requirements..
0 comments:
Post a Comment